MUD Puma heater deflector to fit land rover defenders with puma engines

Fits TDCI Land Rover Defenders

This product is to stop the annoying blast of hot air to your legs 

Heater Deflector Fitting Instructions

1. Before you install you need to identify the four small ‘dimples within the moulding that indicate the fixing positions. Drill out the four fixing positions in the moulding with a 4.5mm drill.

2. Position the deflector in place. Squeeze back the rubber matting/carpet in front of the shifters to allow the it to drop down into place.

3. Push upwards as far as it will go ensuring it's tucked behind the lower edge of the dashboard panel.

4. Use a 4.5mm drill to create the fixing holes in the dashboard. Drill slowly and do not press too hard whilst drilling to avoid hitting the heater assembly/pipework.

5. Secure in place by pushing the four plastic rivets through the moulding and into the dashboard.

ALL ITEMS ARE DISPATCHED FROM THE UK. IMPORT DUTIES MAYBE PAYABLE ON INTERNATIONAL ORDERS. UNLESS SPECIFICALLY STATED OTHERWISE OUR PRODUCTS ARE NOT SUITABLE FOR THE NEW SHAPE (2020+) DEFENDERS.